Specifications Humidity Transducer Accuracy*: ± 2% / ± 3% RH Range: 0 - 100% RH Hysteresis: ± 1% Supply Voltage: 12-40 VDC / 12-35 VAC (VDC output units only) Compensated Temperature Range: -30°F to 130°F (-35°C to 55°C) Load Impedance: 1500 ohms max. at 40 VDC (mA output units); 1000 ohms min. (VDC output units) * Includes non-linearity and non-repeatability Thermistor Sensor Interchangeability: ± 0.2°C Heat Dissipation: 3.0 mW/°C R/T Characteristics: Refer to TI.700-11 (See Temperature Sensor section) Operating Temperature Range: -30°F to 130°F (-35°C to 55°C)  Platinum RTD Sensor Accuracy: 0.12% at 0°C Resistance: 100 or 1000 ohm at 0°C Standard: DIN 43760 Heat Dissipation: 3.0 mW/°C R/T Characteristics: Refer to TI.700-11 (See Temperature Sensor section) Operating Temperature Range: -30°F to 130°F (-35°C to 55°C)   General Environmental: 10 - 100% RH Enclosure: 18 Ga. C.R. Steel NEMA-4 (IP-65) Finish: Baked on enamel PMS2GR88B Termination: Unpluggable screw terminal block Wire Size: 12 Ga. maximum Weight: 1.0 lb. (.45 kg)   Conformance & Testing RoHS Compliant EMC Testing: BS EN 55022:1998, BS EN 55024:1998, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11